Surface mounting is better than through hole soldering because it saves time and money. Read on to learn more about surface mounting!
Through hole soldering is an old method for connecting wires in electronic devices. It involves inserting a wire into a small hole in a circuit board and then soldering the ends of the wire to the board. This process is much faster than using surface mounting techniques.
SURFACE MOUNT TECHNOLOGY HAS BEEN AROUND SINCE THE 1950’S
In the early days of electronics, there were no surface mount technologies available. Instead, people had to use through hole soldering methods. However, as technology advanced, new ways of connecting circuits became necessary. One such advancement was surface mount technology.
Surface mount technology (SMT) allows manufacturers to solder components directly onto printed circuit boards instead of using through-hole technology.
SMT uses a different method than through-hole soldering. The components are placed on top of the board and then heated until the solder melts. Once the solder cools, the component is permanently attached to the board.
Through-hole technology is still used today, but SMT is becoming increasingly popular because it saves space and reduces costs. For example, if a manufacturer needs to add a new feature to a product, they could simply place the component on top of the board rather than drilling holes into the board.
At the same time, SMD is gaining popularity due to its many advantages. First, SMDs have a smaller footprint. Since SMD components are placed on top, they take up less space than through-hole components.
Second, SMD components are easier to handle. Because they are placed on top of the PCB, they are easier to handle than through-hole components that must be drilled into the board.
Finally, SMD components are less expensive than through-hole components because they require less material. And SMD components are more reliable than through-hole components, which may be more desirable.
That’s why the technology from the 1950’s is still in use today.
（Picture of Wonderful PCB）
SURFACE MOUNT TECHNOLOGY IS USED BY MOST ELECTRONIC MANUFACTURERS TODAY
Yes, for now, the needs of customers are crucial.
Any excellent manufacturer will not ignore the needs of customers. When people choose surface mounting more, manufacturers will pay more attention to technical services.
Of course, a reputable electronics contract manufacturer (ECM) ticks all the boxes.
SURFACE MOUNT TECHNOLOGY ALLOWS YOU TO USE SMALLER COMPONENTS
Surface mount technology allows us to use smaller components. These small components save space and make our products smaller. They also allow us to put more components on a board. Smaller components mean less material used and less waste.
Now that custom PCBs are becoming more mainstream, it becomes even more important to connect resistors, capacitors, inductors, transistors, diodes, and other devices. Smaller components can help you have more space to accommodate components, making your circuit boards more high-quality.
SMT allows the use of smaller components than through-hole technology, which requires soldering each lead individually. The advantage of SMT is that it reduces the amount of space required to accommodate components.
This means that we can save time and money by using fewer materials.
（Picture of Wonderful PCB）
SURFACE MOUNT TECHNOLOGY MAKES ASSEMBLY EASIER
Surface mount technology is very similar to through hole soldering. It uses the same techniques as through hole soldering. However, it does not require drilling holes into the boards. Instead, we place solder paste onto the board and then apply heat to melt the solder. This process is much faster than drilling holes and inserting wires.
The main difference between surface mount technology and through hole soldering is that surface mount requires less space. Through hole soldering requires a lot of room because there must be enough clearance around each wire to allow them to pass through the board. In addition, through hole soldering requires a larger amount of solder paste. Surface mount technology allows us to use smaller amounts of solder paste.
MANUFACTURER OF QUALITY SERVICE
Now, you probably understand why more people use surface mounting. In this tutorial we mentioned most of the benefits of surface mounting, it took decades for SMT to catch on.
Today, it is gaining in popularity, and being able to increase the size and efficiency of electronics is critical in today’s ever-smaller electronic devices.
Maybe you are also looking for the right partner, choosing a reliable manufacturer for your electronics can be a daunting task.
If you want design and customization, component procurement, free inquiry on the right.
English