Processing methods and details of gold fingers in PCB
Gold fingers
On computer memory sticks and graphics cards, we can see a row of golden conductive contacts, which are called “gold fingers”.
Surface Treatment of Gold Fingers PCB
- Electroplated nickel gold: the thickness can reach 3-50u”, because of its excellent electrical conductivity, oxidation resistance and wear resistance, it is widely used in gold finger PCBs that need to be plugged frequently or PCB boards that need to be mechanically rubbed frequently The above, but because the cost of gold plating is extremely high, it is only used for local gold plating such as gold fingers.
- Immersion gold: the thickness is conventional 1u”, up to 3u”. Because of its excellent conductivity, flatness and solderability, it is widely used in high-precision PCB boards with key positions, binding IC, BGA and other designs. For gold finger PCBs that do not require high wear resistance, the whole board immersion gold process can also be selected. The cost of the immersion gold process is much lower than that of the electro-gold process. The color of the immersion gold process is golden yellow.
Detail Processing of Gold Fingers in PCB
(1) In order to increase the wear resistance of the gold finger, the gold finger usually needs to be electroplated with hard gold.
(2) The gold finger needs to be chamfered, usually 45°, other angles such as 20°, 30°, etc. If there is no chamfer in the design, there is a problem; a 45° chamfer in the PCB looks like this:
(3) The gold finger needs to be treated with a whole block of solder mask to open the window, and the PIN does not need to open the steel mesh;
(4) Immersion tin and immersion silver pads need to be at a minimum distance of 14mil from the top of the finger; it is recommended that the pad should be more than 1mm away from the finger position during design, including via pads;
(5) Do not lay copper on the surface of the gold fingers;
(6) All layers of the inner layer of the gold finger need to be cut copper, usually the width of the copper cut is 3mm larger; it can be used to cut copper for half fingers and for the whole finger.
Is Gold fingers Gold?
There are two concepts: soft gold and hard gold. Soft gold, generally softer gold. Hard gold is generally a compound of hard gold.
The main function of the gold finger is to connect, so it must have good electrical conductivity, wear resistance, oxidation resistance and corrosion resistance.
Because the texture of gold is relatively soft, gold fingers generally do not use gold, but only electroplate a layer of “hard gold (gold compound)” on it, which can not only obtain good electrical conductivity of gold, but also make it have wear resistance, resistance to Oxidation properties.
So has PCB ever used “soft gold”? The answer is, of course, there is use, such as the contact surface of some mobile phone buttons, the aluminum wire on the COB (Chip On Board), etc. The use of soft gold is generally to precipitate nickel gold on the circuit board by electroplating, and its thickness control is more flexible.
About Wonderful
Shenzhen Wonderful Technology Co., Ltd. is China’s top model and small batch circuit board manufacturer.
The company targets precision circuit board samples and small batches as the main target market. Since its establishment, it has adhered to the development concept of good quality and important reputation.
Invest huge sums of money to introduce advanced equipment, strictly regulate the operating standards and QC standards for incoming and outgoing materials, to ensure that the shipped products reach Seiko quality.
The self-developed ERP management system can realize the whole process of paperless operations such as online ordering, online payment, online production progress query, online logistics tracking, and online statistical report production, which greatly improves work efficiency.
It ensures that each order can be shipped quickly. After more than ten years of development, the company’s products and services have been well received by the market.
As well as the opening of an electronic component mall, integrated circuits, semiconductors, resistors, capacitors and other products are sold.
The company’s scale is developing rapidly, and the sample and small batch shipment capacity reaches 500 models/day.
The products are widely used in communications, medical equipment, industrial control products, aviation, military products, testing instruments,Automotive, computers and other peripheral products.
We will continue to pay attention to customers, with efficient delivery speed and perfect after-sales service, to become the most trusted brand supplier in the PCB industry.
Wonderful PCB You can send us your requirements first. Click here to contact us.
You can click our component store. Please click here to contact us.
Related Reading
What Is an Annular Ring? Tell You for Free!
Wonderful PCB, share the method of correcting the bottom plate of the PCB.
English